Patton’s FP101E/BT90 converts single mode or multimode fibre to a copper Ethernet signal. With the built-in high power PoE (Power over Ethernet) injector and a local power source, you can easily and reliably extend both power (90 watts/high power PoE) and 10/100/1000 Mbps Gigabit Ethernet to any PoE enabled end point including devices such as IP security cameras, IP speakers, Digital Signage, VoIP phones, Wireless Access Points, POS kiosks, BACs, PLCs and more.

Patton’s FP102E/BT90 converts single mode or multimode fibre to a copper Ethernet signal. With the built-in high power PoE (Power over Ethernet) injector and a local power source, you can easily and reliably extend both power (90 watts/high power PoE) and 1–10 gigabit Ethernet to any PoE enabled end point including devices such as IP security cameras, IP speakers, digital signage, VoIP phones, wireless access points, POS kiosks, BACs, PLCs, and more.

Patton’s CL141E/BT90 is an industrial all-in-one gigabit high power PoE injector and power booster. Our power boost technology allows low input voltages, such as 24–48 VDC to be boosted up to the required IEEE802.3bt PoE requirements of 55 VDC.

This is a perfect PoE injector for use in light industrial environments. The CL141E/BT90 is housed in an IP30-rated DIN-rail or wall-mount enabled enclosure, and has a wide operating temperature of -40 to 167°F (-40 to 75°C). Its rugged design, wide temperature and power input range makes it an ideal model for security, building automation, transportation and telco applications.

Elegantly simple yet packed with an advanced feature set, the FP1004E is a powerful 6-port 10/100/1000 Light Industrial Ethernet switch. The unit features (4) RJ-45 UTP ports as well as (2) flexible SFP ports. Two or more FP1004E can be chained together via fibre to provide a distributed solution where isolation, distance, security and/or noise immunity is needed between nodes.
Locally, an 8 copper x 2 optical switch can be created using a Passive SFP Cable Assembly between SFP ports. This cable saves cost by replacing (2) optical modules and a fibre cable with an inexpensive copper jumper. While this solution is only good for very short ‘jumper’ lengths, it provides flexibility for local port expansion.

Patton’s FP1005E Unmanaged Industrial Gigabit Ethernet Switch supports industrial applications requiring high bandwidth or high density connections, such as power/utilities, water/wastewater treatment, oil/gas/mining, process control automation, security access control systems, and intelligent transportation systems.

Patton’s FP1008E Un-Managed Industrial Gigabit Ethernet Switch supports industrial applications requiring high bandwidth or high density connections, such as power/utilities, water/wastewater treatment, oil/gas/mining, process control automation, security access control systems, and intelligent transportation systems.

Patton’s FP1008E/AT Unmanaged Industrial Gigabit Power Over Ethernet Switch is a Hardened Switch PoE that supports industrial applications requiring high bandwidth or high density connections, such as power/utilities, water/wastewater treatment, oil/gas/mining, process control automation, security access control systems, and intelligent transportation systems.

Patton’s FP1108E Un-Managed Industrial 10 Gig Ethernet Switch supports industrial applications requiring high bandwidth or high density connections, such as power/utilities, water/wastewater treatment, oil/gas/mining, process control automation, security access control systems, and intelligent transportation systems.

Patton’s FP2005E/BT is a 7-port industrial Gigabit PoE++ managed Ethernet switch embedded with 4*10/100/1000Tx Ethernet ports that support IEEE802.3at/af/bt for a maximum of 90W/port, 1*10/100/1000Tx gigabit Ethernet port, and 2*100/1000 dual rate SFP slots for fiber connection. The FP2005E/BT is a fully manageable Light Layer 3 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as IGMP, VLAN, QoS, SNMP, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks.

Patton’s FP2008E Managed Industrial Gigabit Ethernet Switch supports industrial applications requiring high bandwidth or high density connections. The FP2008E is a fully manageable Layer 2 Ethernet switch, pre-loaded with a user-friendly web management console design. Ring network redundancy is provided by MSTP/RSTP and open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol which has a < 50ms network recovery time. Advanced L2 network filtering and prioritization include IGMP, VLAN, QoS/CoS/ToS. Efficient monitoring and security can be achieved through SNMPv1/v2/v3, RMON, port mirroring, 802.1x, HTTPS, SSH/SSL.

Patton’s FP2008E/AB is a 12-port industrial gigabit PoE++ managed Ethernet switch embedded with 4*10/100/1000Tx Ethernet ports that support IEEE 802.3bt for a maximum of 90W/port, 4*10/100/1000Tx Ethernet ports with IEEE 802.3af/at support for a maximum of 30W/Port, and 4*100/1000 dual rate SFP slots for fibre connection. The FP2008E/AB is a fully-manageable Light Layer 3 Ethernet switch that is pre-loaded with a user-friendly web management console design. It supports the ring network redundancy function using the market’s open standard ITU-T G.8032 Ethernet Ring Protection Switch (ERPS) protocol that has a <50ms network recovery time. The advanced network filtering and security functions, such as IGMP, VLAN, QoS, SNMP, RMON, Modbus TCP, and 802.1X/HTTPS/SSH/SSL increase determinism and improve network management for remote SCADA systems or control networks.

Patton’s FP2008E/AT Managed Industrial Gigabit Power Over Ethernet Switch supports industrial applications requiring high bandwidth or high density connections. The FP2008E/AT is a fully manageable Layer 2 PoE+ switch, pre-loaded with a user-friendly web management console design. Ring network redundancy is provided by MSTP/RSTP and open standard ITU-T G.8032 ERPS (Ethernet Ring Protection Switch) protocol which has a < 50ms network recovery time. Advanced L2 network filtering and prioritization include IGMP, VLAN, QoS/CoS/ToS. Efficient monitoring and security can be achieved through SNMPv1/v2/v3, RMON, port mirroring, 802.1x, HTTPS, SSH/SSL.