Patton ProAV Transport Products

Pro-AV Extender/Converter Kits

FiberPlex TKIT HDMI Fibre Converter bundles leverage the incredible flexibility of our TD-6010 12.5 Gbps workbox bundled with a set of application-specific SFP modules—creating a simple, easy-to-order solution for your specific application.

Options Available:

TKIT-DANTE: DANTE/AVB Networked Audio over Fibre Extender Kits (2-Pack)
TKIT-3G: SDI Fibre Converter Kits | Extend HD Video over Fibre
TKIT-HDMI: HDMI Fibre Converter Pro-AV Extender Kits (2-Pack)
TKIT-MADI: MADI/AES10 Audio Over Fibre Extender Kits (2-Pack)
TKIT-SD: Analog Video to Optical Conversion Kit
TKIT-ETH: 10/100/1000BASE-T Ethernet to Optical Conversion Kit

CopperLink CL1151E

Dante over Copper 10/100 Extender

The CopperLink 1151E kit from Patton enables Ethernet connectivity of your Dante enabled devices over previously installed copper infrastructure, such as existing speaker, alarm cables even CCTV coaxial cable.
Instantaneously install your 10/100BaseTX Dante enabled speakers, I/O converters and more—with no additional overhead cost. With the extended reach the CL1151E kit provides, you can install your IP Audio Video and teleconferencing equipment exactly where you want it!

FiberPlex FOI-1GBT

Ethernet-to-Fiber Converter | 1000BASE-T Isolator/Modem enclosed in mission critical packaging

The FOI-1GBT is a rock-solid plug-and-play Ethernet-to-fibre converter & isolator that provides media conversion and extension of Ethernet over fibre. The Ethernet-to-fibre converter provides complete electrical isolation for 1000BASE-T Gigabit Ethernet communications. The unit can be used in areas of high electrical noise or in and out of RF shielded enclosures.

The fibre optic cable is not susceptible to interference caused by impulse noise, crosstalk, or EMI. Privacy of communications is also enhanced because the fibre optic cable does not radiate any emissions. In addition, fibre optic cable offers much longer transmission distances than copper wiring.

FiberPlex FOI-2172

Fiber Optic Isolator/Converter/Modem - Unidirectional Composite Video W/ Audio

The FOI-2172 and FOI-2173 both provide complete electrical isolation for composite video and audio communications. The units are compatible with NTSC, PAL, and SECAM video broadcast standards. The units are transparent to all monochrome RS-170, colour RS170A, and closed circuit RS-330 video. The FOI-2173 has an AGC (automatic gain control) to stabilize the video output for different fibre optic cable lengths. Adjusting the AGC potentiometer will also increase or decrease the overall scene brightness. The FOI-2172 can accept a wide level of audio input because clipping can be adjusted by the LVL potentiometer, while the FOI-2173 LVL potentiometer controls the volume.

Scroll to Top