- Global Cache
- Sound Control Technologies
- AVPro Edge
- Absen LED
- Case Studies
TechLogix Room Kits presentation switchers redefine the usability, versatility and cost of huddle room, meeting room and classroom collaboration. When paired with the included table inserts or input wall interface plates, the systems switcher provides both AV switching and display control for the cost of most 40″ displays using innovative table insert controllers and a professional-grade switcher.
Unfortunately, technology in classrooms and conference rooms is often more frustrating than effective. The headache begins at the design stage—random parts need to be pieced together to form some semblance of a system. The headache continues into the purchasing stage—technology is expensive, often costing multiple thousands of dollars per room. Installation is just as painful—those random parts now need to be connected together, and extensive programming is required to make them operate as one. And then the head explodes—the system is too daunting for the presenter, so they let it sit unused.
Thousands of dollars and countless hours are wasted by the users of the rooms who opt to ignore the expensive technology around them.
Enter the TL-CAV-01 room kit. We’ve designed the system to be affordable, easy-to-install, intuitive to use, and powerfully effective as a presentation and room audio-visual signal management tool. The system includes both audio and video routing and control, and only requires a single shielded twisted pair cable to connect all of the components. Best of all, a simple wallplate controller provides users with volume control and source selection, and automatic modes of operation ensure the system will be used and not feared. The single TL-CAV-01 part number replaces hours of design and installation work, and the all-in system price is unrivaled in the education and corporate AV technology markets.
(1) included wallplate transmitter
(1) included wallplate controller
(1) included surface-mount receiver/processor
(2) HDMI source inputs / (1) HDMI & (1) VGA input
Automatic switching with connection sensing
Manual control via IR and RS232
USB pass-through for interactive whiteboard integration
Single twisted pair connectivity
Mic/line input with 48V phantom power
HDMI output with audio de-embedding
Built-in 2x20W 4Ω amplifier
TCP/IP connectivity for system wide monitoring and diagnostics
Firmware upgradeable via USB thumb drive
IR learning for control of connected devices
We’ve all experienced it…you walk into a meeting room and there are cables all over the place… a couple on the table, a couple under the table, maybe one dangling from the projector or display. You place your laptop on the conference room table and ask, “which cable do I use to connect my presentation?” Your colleague just stares back blankly… Great, this meeting is off to a wonderful start…
The problem is exacerbated when you have multiple people all trying to share content. A poorly implemented meeting room that is difficult for one presenter to use efficiently is near impossible for multiple participants. Enter TechLogix…
TechLogix Share-Me™ Series presentation switchers redefine the usability, versatility and cost of huddle room, meeting room and classroom collaboration. When paired with the included table inserts, the Share-Me™ Series under-table mounted switcher provides both AV switching and display control for the cost of most 40″ displays using innovative table insert controllers and a professional-grade switcher.
With the Share-Me System, table inserts are included for HDMI source devices, providing connectivity for sources such as laptops and tablets, as well as display on/off and source selection control that is simple enough for any user to understand with virtually no training.
Simply put, an entire meeting can be run with only two buttons: an “on/off” button which turns the switcher and the display on or off, and a “share me” button which switches the active input channel to the table insert on which the button was pressed.
The system also features automatic switching for sources that are not connected to the table inserts, such as media players, fixed PCs, or document cameras. When a source is connected and/or powered on, the system will recognize the input and automatically switch to that channel.
The TechLogix Share-Me™ Series is also designed for an extremely quick installation. Simply mount the switcher under the podium or conference room table, mount the table inserts in pre-cut holes sized from 36mm through 60mm, and connect the table inserts to the switcher using standard HDMI cables and a 3.5mm cable. All power and control commands are sent from the table inserts to the switcher via the 3.5mm cable, and all display on/off commands are sent from the switcher to the display via CEC over an HDMI cable.
Includes switcher with (1) two HDMI inputs, one VGA input, and one HDMI output OR three HDMI inputs, and one HDMI output
Includes appropriate amount of HDMI control grommets & VGA control grommet. Please make sure of the kit you are after.
Includes 2m cabling fly leads
Includes three 2m SMC controller cables
Manual or automatic switching modes
HDMI ports support DisplayPort and MHL
CEC display control
Under table mounting kit included
Quick connect ports for table insert integration
Historically, collaboration technology meant expense and complexity or do-it-yourself frustration. In either case, rarely was the actual use and preference of the ultimate user considered. Enter the TechLogix SMP System.
This intuitive package combines a control system, twisted pair extender, and presentation switcher in a single, affordable package.
Simply place the transmitter in the collaboration space, place the receiver at the display or projector, connect the two with a twisted pair cable, and connect power to the receiver.
No more complexity, lost remote controls or missing presentation adapters—the SMP transmitter and receiver manage the room reliably, affordably, and intuitively.
Designed for table or podium-top use
HDMI and VGA+audio inputs OR HDMI only
Twisted pair connection between transmitter and receiver
Buttons for source selection and display control
Built-in cable strain relief and security
Built-in IR window for learning commands
Selectable CEC and IR display control outputs
Powered from the receiver
Locking power supply
220 ft. (70m) max distance between transmitter and receiver