TechLogix Extenders

TechLogix extenders distribute a variety of audio, video, control and data signals over Fiber Optic & Twisted Pair cable.

Fiber optic extenders are available in multimode and/or single-mode cabling.

TechLogix twisted pair extenders combine innovation and performance. In a world moving to fiber optics, our twisted pair extender portfolio continues to gain attention thanks to ultra-slim chassis designs and industry leading VLC (visually lossless compression) technology.

Twisted Pair Extenders

TL-TP100-HDC2

18G HDMI, Audio, & Control over Twisted Pair Cable Extender Set -- 100m

The TechLogix TL-TP100-HDC2 revolutionizes high-bandwidth HDMI signal distribution by transmitting 18G HDMI signals, including HDR and 4K@60 4:4:4, up to 100m (330 ft.) over shielded twisted-pair cabling (Category 5e or greater).

The system works by lightly compressing signals above 10G for twisted pair transport, and then uncompressing the signal at the destination end. Flexible options for ARC (Audio Return Channel) allow the receiver to accept HDMI, analog, or digital optical. The transmitter can output the audio on HDMI, analog, or digital optical outputs.
Additional built-in features such as flexible power with Port-Saver™ protection, IR and RS232 signal distribution, and Ethernet pass-through make the TL-TP100-HDC2 extremely powerful and extremely flexible.

The set includes a power supply with international adapters and mounting brackets.

Technical Features:
18G HDMI (4K@60) up to 100m
ARC on HDMI, Analog, and Optical Inputs and Outputs
Deep color, DTS-HD, Dolby TrueHD compatible
HDR compatible
Light compression (2:1 ratio) on signals over 10G
Single twisted pair transmission
HDMI 2.0 / HDCP 2.2
Built-in RS232, IR & Ethernet transmission
Ethernet ports on send & receive
Diagnostic LEDs

TL-TP70-HDC

HDMI & Control over Twisted Pair Cable Extender Set -- 70m

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP70-HDC replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.

In actual practice, this means you can use the TL-TP70-HDC to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely…all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

Technical Features:
Transmit HDMI, RS232 & IR over a single twisted pair cable
Extend 1080p HD up to 230 ft. (70m.)
Extend 4K@30 HD up to 130 ft. (40m.)
Embedded bi-directional IR and RS232 control
System powered from either the transmitter or receiver

TL-TP70-HDARC

HDMI w/ ARC & IR over Twisted Pair Cable Extender Set -- 70m

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP70-HDARC replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 230 feet. Plus, built-in IR control signal embedding allow you to also transmit bi-directional IR commands with the HDMI stream.

In actual practice, this means you can use the TL-TP70-HDARC to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely…all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

Technical Features:
Transmit HDMI & IR over a single twisted pair cable
Extend 1080p HD up to 230 ft. (70m.)
Extend 4K@30 HD up to 130 ft. (40m.)
Embedded bi-directional IR control
System powered from either the transmitter or receiver
Audio Return Channel (ARC)
TechLogix port-saver power circuit design

TL-TP50-HDIR

Economy HDMI & IR over Twisted Pair Cable Extender Set -- 50m

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP50-HDIR replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 165 feet. Plus, built-in IR control signal embedding allow you to also transmit IR commands from the remote room to the equipment rack or source device.

In actual practice, this means you can use the TL-TP50-HDIR to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely…all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

Note the TL-TP50-HDIR require shielded twisted pair cable with shielded connectors.

Technical Features:
Requires shielded twisted pair cabling & shielded connectors
Transmit HDMI & IR over a single twisted pair cable
Extend 1080p HD up to 165 ft. (50m)
Embedded IR control from the display to the source
HDMI 1.4 compatible
HDCP 1.4 compatible
Deep color, DTS-HD, Dolby TrueHD & 3D support
HDMI local display loop out on the transmitter
Built-in mounting ears
Built-in EDID copying & configuration

TL-TP40-HDC2

18G HDMI & Control over Twisted Pair Cable Extender Set -- 40m

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-TP40-HDC2 replaces a traditional HDMI cable with active electronics designed specifically for sending video signals up to 130 feet. Plus, built-in IR and RS232 control signal embedding allow you to also transmit remote control commands with the HDMI stream.

In actual practice, this means you can use the TL-TP40-HDC2 to send audio and video signals from your source device (often a switcher, cable box, or DVD player) to your destination device (often a display or projector) and control the source device remotely…all using a single twisted pair cable. In other words, you can install your source device in a remote closet or cabinet and control it with the same remote control used for your display. Now that’s a clean installation!

Technical Features:
Transmit HDMI, RS232 & IR over a single twisted pair cable
18G 4K@60 4:4:4 compatible
130 ft. (40m) max distance for 4K
220 ft. (70m) max distance for 1080p
Embedded bi-directional IR and RS232 control
System powered from either the transmitter or receiver
HDMI 2.0 and HDCP 2.2 compliant
CEC & HDR compatible
Light compression (2:1 ratio) on signals over 10G

Fiber Optic Extenders

TL-FO-HD

HDMI over Fiber Optic Cable Extender

HDMI cables are great for transmitting audio and video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long HDMI cable or connecting multiple HDMI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-FO-HD replaces a traditional HDMI cable with active electronics designed specifically for sending audio and video signals up to 1,000 feet. Simply connect the TL-FO-HD transmitter to your source device (often a switcher, matrix, DVD player or cable box), connect the TL-FO-HD receiver to your destination device (often a display or projector), connect the two units with a fiber optic patch cord (sold separately), and connect the power supplies.

Unlike boosters or twisted pair extenders, the TL-FO-HD uses fiber optic technology that is immune to outside electrical interference and will better future-proof your facility.

Technical Features:
Transmit HDMI audio & video over a fiber optic patch cable
Extend 1080p HD up to 1,300 ft. (400m.)
Extend 4K@30 HD up to 1,000 ft. (300m.)
LC connectors on both the transmitter and receiver
Male HDMI connectors for direct connection to devices
Single or multimode fiber compatible
Powered via USB or standard AC
Single fiber cable transmission
Immune to RF and EM interference

TL-FO-DVI

DVI over Fiber Optic Cable Extender

DVI cables are great for transmitting digital video signals short distances, but larger buildings and larger rooms often need electronics inline to ensure signal performance. Simply pulling a long DVI cable or connecting multiple DVI cables together can cause signal drop out, interference, pixelization and a host of other signal and performance problems.

The TL-FO-DVI replaces a traditional DVI cable with active electronics designed specifically for sending video signals up to 1,000 feet. Simply connect the TL-FO-DVI transmitter to your source device (often a switcher, matrix, video processor or computer), connect the TL-FO-DVI receiver to your destination device (often a display or projector), connect the two units with a fiber optic patch cord (sold separately), and connect the power supplies.

Unlike boosters or twisted pair extenders, the TL-FO-DVI uses fiber optic technology that is immune to outside electrical interference and will better future-proof your facility.

Technical Features:
Transmit DVI over a fiber optic patch cable
Extend 1080p video up to 1,000 ft. (300m.)
Extend 1920×1200 video up to 1,000 ft. (300m.)
LC connectors on both the transmitter and receiver
Male DVI connectors for direct connection to devices
Single or multimode fiber compatible
Powered via USB or standard AC
Single fiber cable transmission
Immune to RF and EM interference